How To Measure Outside Mount Cellular Shades. In this short video from blinds.com you'll see just how easy it. A 24″ x 36″ shade is 24″ wide and 36″ high.
How to Measure for Window Blinds & Shades Steve's Blinds & Wallpaper from www.stevesblindsandwallpaper.com
Measure the width of each window. To determine the height, measure from top to bottom on the top left, then the center of the window, and then the top right to the bottom of the window sill. Measure both the width of the window and the height of the window.
Measuring For Outside Mount Cellular Shades Is Just 2 Easy Steps.
After reading this you will have the confidence to measure your own windows and get the same results as a profession. So you think you can measure for cellular shades on your own. Use a steel tape to measure the exact height and width of the area to be covered.
Measure Both The Width Of The Window And The Height Of The Window.
For outside mount applications allow the blind to overlap 1 1/2 to 3 on the sides, top and bottom of the window. In this short video, you'll see just how simple it is! Round down to the nearest 1/8.
This Is Your Ordering Width.
Check if you have sufficient depth: To have a flush mount (fully recessed) the depth must be at least 2 1/8”. Measuring for inside mount cellular shades is just 2 easy steps.
It Is Recommended That The Shades Overlap The Window By At Least 1” On Each Side.
Measure inside the window opening from the front to the back of the opening where the blind would mount. Watch our video for instructions on how to measure for cellular/honeycomb shades or check out the specific instructions below. Measure the height at 3 places:
Again, Round Off The Measurement To The Nearest 1/8 Inch.
The spruce / sanja kostic. Enter the smallest measurement on your worksheet. Measure the width of each window.
Location:
Share :
Post a Comment
for "How To Measure Outside Mount Cellular Shades"
Post a Comment for "How To Measure Outside Mount Cellular Shades"